Pentair screenlogic setup | Pentair screenlogic wifi setup

An ultimate guide to Pentair screenlogic setup

Generally, the pool or spas available in your home provide a fresh feeling when you arrive home. Similarly, changing the water of pools or spas or warming and cooling the place gets to be sometimes stressful. Additionally, you get rid of these tasks if you have Pentair Screenlogic gadgets. So, to make the most of it, Pentair screenlogic setup is a primary step.

With the Pentair Screenlogic app, you can easily access and configure the smart thermoregulator for your pool or spa place. Similarly, to begin with the Pentair screenlogic wifi setup, first install a wireless connection kit. It will allow you to join the available wireless network. Hence, if you want to explain more about the Pentair setup, keep reading this page!

How to carry out the Pentair screenlogic setup?

Additionally, to access the admin interface of the Pentair automation gadget, you have to install the Wireless connection kit first, then connect the transceiver and antennas. This will enable you to join the available home network.

Similarly, before you proceed with the Pentair screenlogic wifi setup, you must get ready with a stable network, Wireless connection kit, ScreenLogic Config app, smartphone, etc. After gathering all the necessary things, let’s explore the detailed steps for installing the wireless kit first and the detailed steps for configuring the Pentair screenlogic gadget.

Wireless connection kit installation

Firstly, check the components in the installation kit. Generally, it contains a single ScreenLogic Interface indoor wireless transceiver with AC power adapter/one-foot connection cable with attached plugs/single ScreenLogic Interface outdoor wireless transceiver with 10 ft. cable/mounting hardware.
Afterward, install the outdoor wireless transceiver and connect it to the IntelliTouch or Easy Touch Control System Load Center.
Thereafter, connect the transceiver connection cord to the COM port Control System Circuit Board.
Remember to place the ScreenLogic Interface wireless outdoor transceiver within 10 feet of the Load Center.
After that, connect the ScreenLogic interface indoor wireless transceiver to the Screenlogic interface protocol adaptor.
Lastly, connect the ScreenLogic Interface Wireless Connection transceiver AC adapter wall plug to an AC grounded power outlet.

Pro Tip: Remember that you have to refer to the user manual given to you while connecting your Pentair auto interface device.

Pentair screenlogic account setup using an iPad

To begin with, ensure that your Pentair system is placed within range of your router.
Next, confirm that your smartphone is connected to the internet of the home network.
Further, open the App Store on your smartphone and explore the ScreenLogic Config app.

Now, download the ScreenLogic Config app and wait until the installation finishes.
After that, launch the app and you are presented with two options for connecting to your Pentair ScreenLogic systems, i.e., Local or Remote.
Next, if you prefer the Local option, then you will join the network of the router to which your Protocol Adapter is connected and the app will then scan for the same local home network.
Similarly, if you opt for the Pentair Screenlogic Remote Setup option, then you will have to connect to a different network.
Now, select the Local or Remote as per your convenience and then opt for Sign In.
If you are a new user, then you will have to enter the System Name manually on the Sign-in page.
Further, you will be able to give a nickname to your Pentair system.
Next, if you are shown to create a password, then create it and verify otherwise leave it blank.
Finally, the Pentair screenlogic account setup procedure is done now.

Pentair Screenlogic Configuration

Hereon, when you are all set with the admin account, then it’s time to configure the Pentair automation system.
After signing up, you land on the smart Setup dashboard of the Pentair system.
After that, tap on the General Settings>System Info & Password.
Here, click the Set Remote Access Password. Key in your New Password then Confirm this to access remotely for the home network.
Again, you will also find info, like the Pentair system model and Firmware file version, and even the adaptor used.
Go back once again to the General Setting.
Scroll down a bit on its dashboard. Here, configure the date & time, location, language, etc. Then, tap the button Save when these settings are done.
Again, navigate to the following subsections after the General Settings, such as Setup Circuits, Other Equipment, Spa side remotes, Schedules, etc. as per the guidance given on the screen.
At last, tap on Save to secure and apply all the newly modified settings that you made and the Pentair App Setup ends now.

What are the quick fixes for Pentair screenlogic setup issues?

Generally, the process of Pentair Screenlogic Wifi Setup is fairly easy through the app but its initial setup is somewhat complex. So, users sometimes face several issues while setting up their Pentair automation system for the first time. Therefore, we highlight some effective troubleshooting tips to eliminate these errors, let’s take a look:

First of all, check that the antenna is placed above the control panel and the LED blinks green.
Access the touch panel of the Pentair system and go to Settings. Here, search for the Wireless Address/Address Wireless. If it is connected, you can see panel scans for the available network and you can further check and get the Set password option.
While accessing the app, enter the accurate admin details and make sure all the necessary permissions are enabled on it.
Use a compatible smartphone while executing the Pentair screenlogic account setup.
Look that you have an updated version of the ScanLogic Config application on your mobile device.
Next, join hardware connections very cautiously and must consider the user guide.
Placing the smart Pentair automation system within the router network or where the signal strength is better.
Also, provide an adequate source of power to the automated system of pool and spa management.
Ensure you save settings after completing Pentair screenlogic setup, or it may not work at all.
Eliminate any microwave, baby monitor, or any similar gadgets that interfere with the signals.
If you are still unable to access or use your Pentair screenlogic system, then hard reset the device and reconfigure it from scratch.

On the whole, the given page explains detailed info about the Pentair screenlogic setup procedure along with the installation process. Still need help? Drop us a line here!